| Mobile module | 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
|---|
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
|---|
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
|---|
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
|---|
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
|---|
| Black/White list | Operator black/white list |
|---|
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
|---|
| Band management | Band lock, Used band status display |
|---|
| APN | Auto APN |
|---|
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
|---|
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
|---|
| Wireless mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
|---|
| Wi-Fi security | WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation |
|---|
| SSID/ESSID | SSID stealth mode and access control based on MAC address |
|---|
| Wi-Fi users | Up to 100 simultaneous connections |
|---|
| Wireless Connectivity Features | Fast roaming (802.11r), Relayd |
|---|
| Wireless MAC filter | Whitelist, blacklist |
|---|
| Hotspot | Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes |
|---|
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing |
|---|
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) |
|---|
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
|---|
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
|---|
| Firewall | Port forward, traffic rules, custom rules |
|---|
| DHCP | Static and dynamic IP allocation, DHCP Relay |
|---|
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
|---|
| DDNS | Supported >25 service providers, others can be configured manually |
|---|
| Network backup | Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
|---|
| Load balancing | Balance Internet traffic over multiple WAN connections |
|---|
| SSHFS | Possibility to mount remote file system via SSH protocol |
|---|
| WAN | 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
|---|
| LAN | 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
|---|
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block |
|---|
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
|---|
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
|---|
| VLAN | Port and tag-based VLAN separation |
|---|
| Mobile quota control | Mobile data limit, customizable period, start time, warning limit, phone number |
|---|
| WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
|---|
| Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
|---|
| OpenVPN | Multiple clients and a server can run simultaneously, 27 encryption methods |
|---|
| OpenVPN Encryption | DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256 |
|---|
| IPsec | IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) |
|---|
| GRE | GRE tunnel, GRE tunnel over IPsec support |
|---|
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support |
|---|
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
|---|
| DMVPN | Method of building scalable IPsec VPNs |
|---|
| SSTP | SSTP client instance support |
|---|
| ZeroTier | ZeroTier VPN client support |
|---|
| WireGuard | WireGuard VPN client and server support |
|---|
| Tinc | Tinc offers encryption, authentication and compression in it's tunnels. Client and server support. |
|---|
| ID range | Respond to one ID in range [1;255] or any |
|---|
| Allow Remote Access | Allow access through WAN |
|---|
| Custom registers | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality |
|---|
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
|---|
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
|---|
| Supported baud rates | From 300 to 115200 |
|---|
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
|---|
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
|---|
| Number of data bits | From 5 to 8 |
|---|
| Number of stop bits | 1 or 2 |
|---|
| Parity | None, Even, Odd |
|---|
| Flow | None, RTS/CTS, Xon/Xoff |
|---|
| Duplex | Full duplex |
|---|
| Supported baud rates | From 300 to 230400 |
|---|
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
|---|
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
|---|
| Number of data bits | 8 |
|---|
| Number of stop bits | 1 |
|---|
| Parity | None, Even, Odd |
|---|
| Flow | None, Xon/Xoff |
|---|
| Duplex | Half duplex |
|---|
| Protocol | HTTP(S), MQTT, Azure MQTT, Kinesis |
|---|
| MQTT Gateway | Allows sending commands and receiving data from MODBUS Master through MQTT broker |
|---|
| Supported modes | TCP Master, DNP3 Outstation, RTU Master |
|---|
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
|---|
| FOTA | Firmware update from server, automatic notification |
|---|
| SSH | SSH (v1, v2) |
|---|
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
|---|
| Call | Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off |
|---|
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
|---|
| MQTT | MQTT Broker, MQTT publisher |
|---|
| SNMP | SNMP (v1, v2, v3), SNMP Trap |
|---|
| JSON-RPC | Management API over HTTP/HTTPS |
|---|
| MODBUS | MODBUS TCP status/control |
|---|
| RMS | Teltonika Remote Management System (RMS) |
|---|
| Cloud of Things | Allows monitoring of: Device data, Mobile data, Network info, Availability |
|---|
| ThingWorx | Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
|---|
| Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength |
|---|
| Azure IoT Hub | Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type |
|---|
| CPU | Mediatek, 580 MHz, MIPS 24KEc |
|---|
| RAM | 128 MB, DDR2 |
|---|
| FLASH storage | 16 MB, SPI Flash |
|---|
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
|---|
| FOTA | Update FW |
|---|
| RMS | Update FW/configuration for multiple devices at once |
|---|
| Keep settings | Update FW without losing current configuration |
|---|
| Operating system | RutOS (OpenWrt based Linux OS) |
|---|
| Supported languages | Busybox shell, Lua, C, C++ |
|---|
| Development tools | SDK package with build environment provided |
|---|
| GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
|---|
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
|---|
| NMEA | NMEA 0183 |
|---|
| NTRIP | NTRIP protocol (Networked Transport of RTCM via Internet Protocol) |
|---|
| Server software | Supported server software TAVL, RMS |
|---|
| Geofencing | Configurable multiple geofence zones |
|---|
| RS232 | DB9 connector, RS232 (with RTS, CTS flow control) |
|---|
| RS485 | RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate |
|---|
| Serial functions | Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client |
|---|
| Data rate | USB 2.0 |
|---|
| Applications | Samba share, USB-to-serial |
|---|
| External devices | Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter |
|---|
| Storage formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 |
|---|
| Input | 1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high) |
|---|
| Output | 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector) |
|---|
| Events | Email, RMS, SMS |
|---|
| I/O juggler | Allows to set certain I/O conditions to initiate event |
|---|
| Connector | 4-pin industrial DC power socket |
|---|
| Input voltage range | 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max |
|---|
| PoE (passive) | Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC |
|---|
| Power consumption | < 2 W idle, < 7 W Max |
|---|
| Ethernet | 4 x RJ45 ports, 10/100 Mbps |
|---|
| I/O’s | 2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600) |
|---|
| Status LEDs | 1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power |
|---|
| SIM | 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) |
|---|
| Power | 1 x 4-pin power connector |
|---|
| Input/output | 1 x 10-pin industrial socket for inputs/outputs |
|---|
| Antennas | 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS |
|---|
| USB | 1 x USB A port for external devices |
|---|
| RS232 | 1 x DB9 socket |
|---|
| RS485 | 1 x 6-pin industrial socket |
|---|
| Reset | Reboot/User default reset/Factory reset button |
|---|
| Casing material | Aluminium housing, plastic panels |
|---|
| Dimensions (W x H x D) | 110 x 50 x 100 mm |
|---|
| Weight | 287 g |
|---|
| Mounting options | DIN rail (can be mounted on two sides), flat surface placement |
|---|
| Operating temperature | -40 °C to 75 °C |
|---|
| Operating humidity | 10% to 90% non-condensing |
|---|
| Ingress Protection Rating | IP30 |
|---|
| Regulatory | CE/RED, UKCA, CB |
|---|
| Standards | EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Draft EN 301 489-19 V2.2.0, Final draft EN 301 489-52 V1.2.0, EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019, EN IEC 61000-3-2:2019 |
|---|
| ESD | EN 61000-4-2:2009 |
|---|
| RS | EN 61000-4-3:2020 |
|---|
| EFT | EN 61000-4-4:2012 |
|---|
| Surge immunity (AC Power Line) | EN 61000-4-5:2014+A1:2017 |
|---|
| CS | EN 61000-4-6:2009 |
|---|
| DIP | EN IEC 61000-4-11:2020 |
|---|
| Standards | EN 300 328 V2.2.2, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 303 413 V1.1.1 |
|---|
| Standards | EN IEC 62311:2020AS/NZS 60950.1:2015IEC 62368-1:2018,EN IEC 62368-1:2020+A11:2020 |
|---|
