HP ProCurve 10-GbE SFP+ LRM Transceiver (J9152A)

HP ProCurve 10-GbE SFP+ LRM Transceiver (J9152A)
A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LRM standard, for 10-Gigabit connectivity up to 220 m on legacy multimode fiber.

Ports
1 LC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM)
Duplex: full only

Cabling Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)

Maximum distance:
62.5 µm multimode cable @ 160/500 MHz*km = 0.5-220 m
62.5 µm multimode cable @ 200/500 MHz*km = 0.5-220 m
50 µm multimode cable @ 400/400 MHz*km = 0.5-100 m
50 µm multimode cable @ 500/500 MHz*km = 0.5-220 m
50 µm multimode cable @ 1500/500 MHz*km = 0.5-220 m

Notes
1310 nm serial optics.

For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above.

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.